Use AppleScript to control basic functions of PJ-Link enabled Panasonic projectors. Used extensively in Frost/Nixon for projector synchronization with audio elements via QLab (see Show Control Case Study below). All commands are run within QLab using AppleScript cues communicating with
Frost/Nixon, performing now through Saturday, February 17, 2018, features extensive use of media control systems to synchronize audio and camera/video devices. The central device in the video signal chain is the Extron 1616 AV composite matrix switcher. This device inputs
I recently assisted Chris Walker with Holiday Inn at the 5th Avenue Theatre, where I set up a MIDI-controlled relay array for LED/solenoid valve effects in “Let’s Say It With Firecrackers”. As this was rented equipment from the Broadway production (Roundabout
Using QLab 3, Left Coast Mac programmed a continuous video wall controller for Axon’s Seattle office lobby. Using event automation via AppleScript and OSC controls to control the startup, running, and shutdown of the video wall on a daily basis,
Make a texting applet for QLab and QDisplay – Created to solve the problem of verbal communication between a mix engineer and wireless engineer during performances. Using AppleScript, QLab and QDisplay, create a non-verbal communication method to allow the A2 to
Designing Sound Art + Music + Technology